You’re offline. This is a read only version of the page.
Issue while booting. The Database of machine parameters is corrupt.
The startup program Calsetup tries to connect (communicate) with the node 95 (Spray) and register the machine inside coating which does not answer.
To help you more efficiently, we need to analyse the exact data from your machine on our test system. This describes the procedure how to send us your data
Copy machine data, dump and spy files to a flash disk/USB stick
How to generate a spy.txt file for CAN bus data analysis
An output amplifier is overloaded.
Internal monitoring of the control software has been damaged. Stop the machine.
The calibrating tool is not in position.
The OHC conveyor is open.
A cooling circuit has fallen below the minimum flow rate. The measured values are shown on the GCC “Cooling water” page.
The emergency stop button on the control panel has been pressed.
Detailed help for external devices, go to Service andDiagnosis of external devices
The operator can find contact information for Soudronic AG here.
Devices that are operated on the CANopen bus can be diagnosed.
The emergency stop button on the feeder has been pressed.