Early error in starting GCC

Issue while booting. The Database of machine parameters is corrupt.

Issue:

Database of machine parameters is corrupt. 

Other error messages related to same issue:

• Unrecognized database format D:\DATA\data.mdb'.
• Open Db Data D:\DATA\data.mdb was not found
• Open Db Event D:\DATA\data.mdb was not found
• Could not open all databases

Remedy:

Step 1

• Confirm all fault messages with 
• Insert flash disk in the Pc
• Perform a restore  -->   from your flash disk. (The database will then be overwritten.)
• Switch machine off and on

Step 2

• If you have no backup, you can delete the machine database with --> --> 
• Option Password from the key generator is needed.
• With this operation you will lose all the format depended parameters as (can dimension, zero positions, gap distance, etc.)
• Start up your machine and enter your format depended parameters
• Start up your machine and enter your format depended parameters.
• If the machine is running ok perform a Backup 

Issue Source:

PC power is interrupted without proper shut down.

• Check the function of the UPS (Uninterruptible Power Supply).
• Check functionality of UPS batteries