How to generate a spy.txt file for CAN bus data analysis
Preconditions
Lenze PC with Windows 7 operating system
The PC must be powered on without an error.
Machine must be in setup mode (set key on control panel to manual)
Note
If you insert the USB stick after you have powered on the machine, you can plug in and plug out the USB stick at any time.
If the machine was powered on with an inserted USB stick, you must switch off the machine before unplugging the USB stick.
Description
Insert the USB stick to PC (control panel)
Press -->
-->
(The default time is 10 minutes. If you are not sure when the problem occurred, select 60 minutes)
After spy is generated press
spy.txt will be saved on USB stick
Spy is now saved on USB stick. Acknowledge
Go back to production page.
The file is located on the USB stick drive\Data\Spy.txt
Send the USB stick drive\data directory as zip file with your comments to Soudronic's Customer Service.