Views:

Copy machine data, dump and spy files to a flash disk/USB stick


 

Preconditions

Lenze PC with Windows 7 operating system

The PC must be powered on without an error.

Machine must be in setup mode (set key on control panel to manual).
 

Note

If you insert the flash disk/USB stick after you have powered on the machine, you can plug in and plug out the flash disk/USB stick at any time.

If the machine was powered on with an inserted flash disk/USB stick, you must switch off the machine before unplugging the flash disk/USB stick. 
 

Solution with complete BACKUP (spy, dump, option and database)

After powering on the machine, insert the flash disk/USB stick into the PC (control panel)

Press →      →  

Start saving the backup  

When the backup is finished→  → Press 
 

The Backup data will be stored on the flash disk/USB stick.

Send the flash disk/USB stick drive\data directory as zip file with your comments to Soudronic's Customer Service.

Possible data on \Data directory
 

Solution with partial BACKUP (dumps and spy only)

After powering on the machine, insert the flash disk/USB stick to PC (control panel)

Press        Press

Start saving the backup 
 

When the backup is finishedè  èPress
 

The Backup data will be stored on the flash disk/USB stick.

Send the flash disk/USB stick drive\data directory as zip file with your comments to Soudronic's Customer Service.

Possible data on \Data directory
  

Related Products: UNICONTROL, UNICONTROL 3
Comments (0)