You’re offline. This is a read only version of the page.
The first sheet guide is open.
The second sheet guide is open.
The third sheet guide is open.
The fourth sheet guide is open.
STW machine - single can body ejection More than three sheets have been ejected in a row at the single-sheet ejector.
STW machine - rollformer feed AFB A sheet was not transported from the tongue welding station to the rollformer of the AFB.
Protective door for welding rollers is open.
Welding machines in setup mode with hardware ON/OFF keys Welding machines can have two setup modes (normal setup and slow setup).
The three fans in the side wall of the PULSAR are monitored for rotation.
The temperature of the IGBT module is measured continuously. If this temperature exceeds the limit set under 'Max IGBT Temp', this error is displayed.
The measured housing temperature in the PULSAR is greater than the permissible maximum housing temperature under 'Max Case Temp' (standard = 60 °C).
The temperature of the IGBT module is measured continuously. If this temperature exceeds the limit set under 'Max IGBT Temp', this error is displayed.
The measured housing temperature in the PULSAR is greater than the permissible maximum housing temperature under 'Max Case Temp' (standard = 60 °C).
The temperature of the IGBT module is measured continuously. If this temperature exceeds the limit set under 'Max IGBT Temp', this error is displayed.
The measured housing temperature in the PULSAR is greater than the permissible maximum housing temperature under 'Max Case Temp' (standard = 60 °C).