You’re offline. This is a read only version of the page.
Induction oven generator< When the output stage is activated at least one enabling signal is missing (EN1 to GND1 and/or EN2 to GND2) <p>If th
Induction oven generator The internal monitoring of the IGBT current indicates overcurrent/short-circuit.
Induction oven generator The deviation of the inductor current from the setpoint value is too great. Tolerance is max. 10%.
The gas pressure is too low with the oven switched on.
STW machine - strip feed press The strip feed press (tongue strip press) is not ready.
STW machine - tongue strip feed press The automatic tongue strip feed press was not started.
The fifth sheet guide is open.
The sixth sheet guide is open.
The seventh sheet guide is open.
The exit and acceleration conveyor is open.
STW machine - single-sheet eject
Protective door on the right side of the STW is open.
Protective door on the left side of the STW is open.
STW machine - tongue wheel At production start and in production the tongue wheel must be in the lowest position.
The tongue wheel is locked.