You’re offline. This is a read only version of the page.
The ACOPOS drives have not received release clearance from the upstream control unit.
The SCU seam-cooling unit is not ready.
Additional infeed to Conveyor 3 The additional third infeed is not recognized.
Machine ON key When the Machine ON key is pressed, two signals have to be processed.
External sheet feeding to rollformer.
The output amplifier detects an external voltage (output is supplied externally).
During the production process using powder, the CPF fill level sensor has to indicate that it is empty once the maximum time has elapsed.
24 volt and 24 volt NA power supply are missing at the Unicontrol Coldfire node.
24 volt power supply: bridge is faulty at the Unicontrol Coldfire node.
Unicontrol Coldfire node: hardware is faulty.
No error! The energy channel is switched off.
In the event of a change in the energy quality factor, this value is entered into the status log. This message is just informal.
The key, "Eject all can bodies" was operated on the remote control during ejection.
A jam has been detected on the oven conveyor. After more than 2.5 can bodies this jam is detected.
The control unit was not able to process the encoder signal.