Error 89.x Too many faulty can-bodies
Description
More than X (value can be selected in Options page) consecutive defective can bodies were detected.
Or more than 10 consecutive can bodies were detected that had to be ejected, e.g., because the oven, lacquering system, powder system, etc. were not ready.
Remedy
The can bodies ejected are defective:
- Check cut blank.
- Check material quality.
- Check and correct machine settings.
- Monitor reasons for ejection
The ejected can bodies evince no seam faults:
- If material quality/machine setting is changed, the monitor must be readjusted.
- Energy channel: Measure the signals of the energy channel.
- Heat channel: check the lens system setting.