You’re offline. This is a read only version of the page.
ONLY WITH DCD: One or more can bodies pass the can-body sensor but no speed signal (A032 input 1, A032 input 4) is present.
The signals from a sensor do not correspond to what the control expects.
HV CPF 400 powder application This error should never occur.
HV CPF 400 powder application The cascade voltage is too high.
HV CPF 400 powder application The cascade current is too high.
HV CPF 400 powder application The cascade current is too low.
HV CPF 400 powder application The deviation between the target and actual current is too large.
HV CPF 400 powder application The chamber resistance is too high.
HV CPF 400 powder application The chamber resistance is too low.
HV CPF 400 powder application Communication between the CPU and the power section failed.
HV CPF 400 powder application
HV CPF 400 powder application This error should never occur.
HV CPF 400 powder application The wiring check failed.
HV CPF 400 powder application There is no 24 V emergency stop supply voltage.
HV CPF 400 powder application The output current of the output stage is too low.