You’re offline. This is a read only version of the page.
OSS1, OSS2 or inside lacquering supply tank change (UTC)
OSS1, OSS2 or inside lacquering supply tank change (UTC)
OCSAM TPM: protective doors open or not locked.
Gas oven with manual reset of burners When starting the gas oven, the 230 V supply to the burners is first switched on after one minute.
OCSAM TPM: protective doors open or not locked.
OCSAM TPM: protective doors open or not locked.
The protective door of the manual magazine loading is open.
Used by stand-alone systems. The welding machine has sent an OFF signal during production.
Powder system: Following a line stop or powder OFF, the powder tubes are flushed. This message is acknowledged automatically after flushing the lines.
Error 862.x TP: Rear cover open / not locked
Two-hand operation in setup mode For two-hand operation, you must wait until all cans have left the welding machine.
The keys on the touchscreen do not work
HMI: all parameters are lost, but the time settings are still there
The can-body flow can be monitored at the oven. A monitoring device can be started at each oven belt and at the rotary plate.
An ejected can body passes through the confirmatory sensor too late or does not pass at all.