You’re offline. This is a read only version of the page.
Stack feed system for the lifting table The sheet stack could not be aligned.
Stack feed system for the lifting table Protective door to the sheet stack conveyor is open.
Lacquer monitor with LNS or LAS
The lacquer monitor for LNS or LAS is not emitting any measuring pulse. Lacquer is no longer flowing.
The frequency-controlled drives have an error output. If this fault output is set the message, (Drive fault) is displayed.
Wire profiler and wire chopper
Minimum height of the sheet stack has been undercut. The machine will be switched off under control.
No error! The energy channel is switched off.
OCR (Over Current Reduction) monitor
Line control
Can-body flow at can upender is monitored.
Can-body flow and filling quantity on rotary plate are monitored.
An electromagnetic interference has occurred.
The line control is in manual mode.
No error! When all can bodies are ejected from the ejector unit, the reason for ejection can be seen on page "EventLogPage"