The GCC stops with a fault message: "required hardware missing or faulty"
Issue
The GCC stops with a fault message: "required hardware missing or faulty".
Note: The number in brackets is the number of the CAN-bus adapter:
- 0 = Kvaser
- all others = set address at the CanBridge.
The Kvaser CAN card, Kvaser, USB CAN-bus adapter or CAN-bridge is missing or faulty.
Remedy
Example: Kvaser CAN card
1. Check if the can card is connected correctly within the PC.
Picture B&R PC with SAG number 745.11108070/30
2. Replace the Kvaser CAN
Example: USB CAN-bus adapter
Example: CAN bridge